• Your locationHome >>ATE Twin Screw Extruder

ATE Twin Screw Extruder

ATE Series Co-rotating Parallel Twin Screw Extruder consists of motor drive, torque distribution gearbox, processing section, temperature controlling units, diesection and down-stream pelletizing system, etc.
 ATE Twin Screw Extruder adopts modular design principle component standardization manufacturing, which can present stable and reliable performance.
 Thanks to the modular principle, ATE extruderscan provide highly customizable solutions according to customers’ process and special requirements. Based on different output torque grade, ATE series extruders have basic type and efficiency type.
 Multiple cutting system can be combined with ATE Twin Screw Extruder, such as strands pelletizing, hot-face cutting and under-water pelletizing, etc.
 Both Relay control and PLC control are available to apply in the ATE electrical controlling system. Allthe key electrical parts adopt European brands to guarantee the controlling system with significant and stable performance.

Typical Applications:
 Engineering plasticsMasterbatchFillingTPE/TPR/TRVDirect extrusion
Parameter of ATE Twin screw extruder

Machine size Screw diameter(mm) L/D Screw speed Max.(rpm) Torque per shaft(Nm) Specific torque T/A3 Throughput rate(kg/h)
ATE35 35.6 32-64 600 115 4.2 40-80
ATE52 51.4 32-64 600 415 5.2 150-250
ATE65 62.4 32-64 600 675 4.8 200-400
ATE75 71 32-64 600 990 4.6 300-700
ATE95 93 32-64 600 2365 5 550-1500
Enhance and modification, such as PP, PA, PBT, ABS, AS, PC, POM, PPS, PET filled with glass fiber or carbon fiber;
Compounding alloy, such as PCABS,PAABS,CPEABS,PPEPDM,PAEPDM,PPSBS,etc.;
Filling and modification, such as PE,PP,EVA filled with CaCO3, talcum power, titanium pigment and carbon soot, etc.;
Cable material, such as LDPEHDPELLDPEMDPE jacket material, insulated material; Radiation cros
 Filling and modification, such as PE, EVA filled with CaCO3, talcum power, titanium pigment and carbon soot;
 Compounding alloy, such as PCABS,PAABS,CPEABS,PPEPDM,PAEPDM,PPSBS,etc.;
 LDPE, HDPE, LLDPE, MDPE jacket material, insulated material;
 Radiation cross-link material, coated optical fiber cable material, heat-shrinkable pipe material; PPR pipe material, PR cross-link pipe material;
 Thermoplastic elastomer, such as TPR, TPU;
 Masterbatch, such as PE, ABS, PS, EVA and so on;
 Flame retardant, such as ABS, EVA and so on; Degradable plastic, such as PE, PP and PS, etc..

 Reaction extrusion, such as continuous polyreaction extrusion of PUR, PA, POM, PEI, PC, PMMA, PBT and PPS, sulfuration, cross-link, graft and extend the chain, etc..
 PVC cable material, sole material, clarity bolt material, medical material;
 Low-smoke and no-halogen material or Low- halogen and flame retardant material;
 EVA screen material, PE and EVA masterbatch, etc..


1.High-speed mixer 2.Screw loader 3.Gravi-feeding system 4.Twin-screw extruder 5a.Strands pelletizing unit
5b.Water ring pelletizing unit 5c.Under water pelletizing unit
5d.Air cooling die face pelletizing unit 6.Production silo
7.Rationing packing scale

Picture gallery

Additional information