ЭКСТРУЗИОННАЯ ЛИНИЯ ДЛЯ ПРОИЗВОДСТВА ТРУБ ПНД p09-1

Наименование : ЭКСТРУЗИОННАЯ ЛИНИЯ ДЛЯ ПРОИЗВОДСТВА ТРУБ ПНД

Product Description

Aceretech plased to provide saving, customized design, high efficient extruder and whole set extrusion production line Based on classical 33D series extruder, we developed 38D series which are widely applied to kinds of polyolefin(e g HDPE, LDPE, PERT, PP, PPB, PPH, PP-R, PS pipe production) The capable of producing pipe diameter from 16mm up to 1600mm.

Application:
- Gas pipe, Water pipe, Oil pipe, Hot water pipe, Cold water pipe, Electrical pipe, Drain pipe
- Special customer requests

Кол-во :

Консультация

Product Introduction

33D Series Classical Production Line

Production Line	Diameter Range (mm)	Extruder Type	Max.Capacity (kg/h)	Max.Haul Off Speed (m/min)	Extrusion Power (kw)
APE-PE-63 I	Ф 20-63	SJ65/32	220	12	55
APE-PE-110 I	Ф 20-110	SJ65/33	220	12	55
APE-PE-160 I	Ф 50-160	SJ75/33	400	10	110
APE-PE-250 I	Ф 90-250	SJ90/33	400	6	110
APE-PE-450 I	Ф 160-450	SJ120/33	500	4	160
APE-PE-630 I	Ф 400-630	SJ120/33	850	2	280
APE-PE-800 II	Ф 500-800	SJ120/33	850	2	280
APE-PE-630 I	Ф 315-630	SJ120/33	850	2	355
APE-PE-800 I	Ф 500-800	SJ150/33	1100	1	400

38D Series High Efficient Production Line

Production Line	Diameter Range (mm)	Extruder Type	Max.Capacity (kg/h)	Max.Haul Off Speed (m/min)	Extrusion Power (kw)
APE-PE-63Ⅱ	Ф 20-63	SJH60/38	320	30	70
APE-PE-110Ⅱ	Ф 20-110	SJH60/38	380	20	90
APE-PE-160Ⅱ	Ф 40-160	SJH60/38	460	15	110
APE-PE-250Ⅱ	Ф 50-250	SJH75/38	600	12	160
APE-PE-450Ⅱ	Ф 110-450	SJH90/38	850	8	250
APE-PE-630Ⅱ	Ф 250-630	SJH90/38	1050	4	280
APE-PE-800Ⅱ	Ф 500-800	SJH120/38	1300	2	355
APE-PE-1200Ⅱ	Ф 710-1200	SJH75/38 SJH90/38	1450	1	160/250
APE-PE-1600Ⅱ	Ф 1000-1600	SJH90/38 SJH90/38	1900	0.6	280/280