I. Introduction to PA6 PA66 Fiber
PA6 (polyamide 6) and PA66 (polyamide 66) are two common polyamide fibers with good wear resistance, corrosion resistance, high strength and excellent resilience. They are widely used in textiles, packaging, automobiles, electronics and other fields. In my country, the production and consumption scale of PA6 PA66 fibers has increased year by year, and has become an important part of high-performance fiber materials.
PA6 fiber is polymerized by caprolactam, has good dyeability and softness, and is mainly used in the production of underwear, socks, sportswear and other textiles. PA66 fiber is polymerized by adipic acid and hexamethylenediamine, has higher strength and wear resistance, and is widely used in industrial yarns, tire cords, conveyor belts and other products.
II. Demand for shredding PA6 PA66 fiber filaments
During the production process, PA6 PA66 fiber filaments will produce certain waste, such as films, woven bags, pipes, profiles, yarns, etc. If these wastes are directly discarded, they will not only waste resources, but also pollute the environment. Therefore, shredding PA6 PA66 fiber filaments to achieve waste recycling has high economic value and environmental significance.
For the demand for shredding PA6 PA66 fiber filaments, ACERETECH recommends the DTS600 disc shredder to you. The equipment has the following characteristics:
Applicable to a variety of materials: DTS400 disc shredder is suitable for PA6 PA66 waste such as film, woven bags, pipes, profiles, yarn, fiber, filament, etc.
Powerful shredding ability: The equipment adopts the principle of single-axis shredding, with strong shredding force and good shredding effect.
Adjustable particle size: By adjusting the mesh aperture, shredded particles of different sizes can be obtained to meet the needs of different customers.
High efficiency and energy saving: DTS400 disc shredder adopts variable frequency speed regulation to achieve high efficiency and energy saving operation.
Easy to maintain: The equipment has a simple structure, convenient maintenance, and reduces maintenance costs.
IV. The parameters of DTS400 are as follows
| 型号 | DTS400 |
| 粉碎仓有效尺寸（mm） | 1800*400 |
| 进料口尺寸（mm） | 750*600 |
| 轴数（n | 1 |
| 轴转速（r/min） | 54 |
| 转子直径￠（mm） | 400 |
| 刀片规格材质 | 锻造耐磨刚性 |
| 主轴材质 | 40Cr，热处理硬度HB250-280（调质） |
| 定刀材质 | H13钢（锻造刀具）洛氏硬度54-57 HRC |
| 联轴器 | 主机与减速机联接采用鼓型齿联接，传递扭矩大 |
| 下机架 | 200*200*10mm矩形管焊接件 |
| 切割室材质 | 16Mn焊接壳体 |
| 轴承 | 一个单向推力球轴承、一个圆锥滚子轴承、两个带锁外圈的角接触球轴承、一个调心滚子轴承（NSK品牌） |
| 电机防护等级 | IP55 |
| 功率（kw） | 55/75 |
| 控制系统变频器 | Inverter: Inovance |
| 减速机 | XINGXING齿轮减速机（水冷）配大推力轴承座 |
| 产量 (Kg/H) | 500~1000（产量根据物料、形状、比重、物料性质等不同而变化） |
点击下方链接查看工厂试机视频。
